ZEVAC DRS24 – Rework System (2000)


Selective lead system for prototype, repair and rework of SMD components.

Electrical Specifications

– Machine Power: 220 VAC +/-5%, 50/60 Hz, single phase, 4.4K VA, 30A
Nema L6-30P 250V plug, 30 amps, 2 pole, 3 wire (supplied);
– Monitor Power:  20VAC, 50/60Hz, 2 amp;
– Camera Power: 120VAC power cube, 60 Hz, 125 ma;
– Speaker Power:  120VAC power cube, 60 Hz, 125 ma.

Physical Specifications

– Machine Operating Dimensions (W x D x H): 60” x 46” x 26”;  (70” x 44” x 26” with workstation*)
*Note: Rear frame of workstation features tall, vertical columns (56”) to support multi-outlet power  bar;
– Machine Weight: 250 lbs (113.4 Kg);
– Workstation Table Dimensions (W x D x H): 62” x 40” x 27”;
– Monitor Dimension (W x D x H): 16” x 17” x 17”;
– Monitor Weight: 53 lbs (24.04 Kg);
– Operator Viewing Height (from module base): 21-24” (adjustable height chair recommended).

Component Requirements

– Beamsplitter Vision System: No minimum size, 2.0” square, 1.0” height.

Component Positioning Adjustments

– Maximum Vertical travel: 5.0” (top to bottom travel);
– Theta Adjustment:    +/- 10 degrees (20 degrees total);
– X & Y Table: Manual control. Cable driven, backlash free design.

Fine adjustment with resolution of less than 0.0005”.

Internal Vacuum System

– Nozzle Vacuum: 26”Hg at pump, 20”Hg (minimum) at cup;
– Parts Handling Probe: 25”Hg minimum;
– Solder Removal Tool: 25”Hg minimum.

Accuracy and Repeatability

– Placement Accuracy: +/- 0.001” at 3 Sigma (or a true position of 1.4 mil).
This is defined as the ability for the machine to hit the target.
– Repeatability: +/- 0.0003”. This is defined as the ability for the machine to return to the same spot.

Embedded Computer System

– Processor: 166 Mhz Pentium™, 32 MB RAM;
– Operating System: Windows/Windows NT 4.0.

Heating Systems

– Top Heater: Patented 1000 watt, triple-pass (preheats incoming air) heating element
with imbedded thermocouple for process (temperature) control;
– Bottom Heaters: 4000 watt double diffuser convection preheater.
Two independent temperature zones with automatic flow adjustment
12” x 20” actual combined size;
– Heater Controllers: All heaters controlled via a closed-loop, auto tuning PID controller.

Self calibrating to +/- 5 degrees C.


Also: English Italiano (Italian) 繁體中文 (Chinese (Traditional))

Additional information


Storage location

Serial Number

Product Enquiry

Question about the Cart

If you have questions or want to request assistance, you can contact us via the form : Contact K.A.V. Systems Engineering s.r.l.